4-12
A-61635 December 2010
•
Image content (%) is below
— creates blank page separations based on
the percentage of image content in the blank page image.
NOTE:
If the pages you will scan are different sizes, a small page may fall
below your blank image byte count even though it contains data.
In this case, you may prefer to describe a blank image by
specifying
% content
rather than byte size.
-
Black & White:
enter the percentage limit for black and white images.
-
Color/Grayscale
: enter the percentage limit for color and grayscale
images.
Test
— opens the Test Image dialog box, which allows you to scan and test
the blank page that is being used as a separator that will be considered blank
when compared against the Image content (%) settings. Use this option to
verify that the software considers the page to be blank. See the next section
“Testing your settings” for more information.
What to do if a page is blank
— select one of the options as the next step
after the software recognizes a blank page separation.
•
Create a new batch
— creates a new batch when a blank page is detected.
•
Create a new document
— creates a new document when a blank page is
detected.
•
Next page stays in current document
— deletes the blank page.
•
Delete page
— when checked, the blank page will not be included in the
batch or document that you are separating on.
Testing your settings
1. Place a document in the scanner that is representative of the document
you want to test for blank page separation.
2. Click
Test
to display the Test Image dialog box.
The results will be displayed in the Test result box.
• The image is: indicates if the image is
Blank
or
Not Blank
.
• Image size is - (bytes): the size of the test image in bytes.
• Content is - %: the percentage of content in the test image.
3. Evaluate the values displayed in the
Image size is - (bytes)
and/or
Content is - %
test result area and click
Close
.
4. Based on the results, readjust your entered values as needed and click
OK
.
