4-78
A-61635 December 2010
Setting up a stamp string
To setup an image stamp string, do the following:
1. Click
Setup
on either the
Front
or
Back
section. The Stamp String Setup
dialog box will be displayed.
2. Select the items from the list of available Stamp String formulas that you
want to include in your stamp string. For each item you select, click
Add
.
NOTES:
•
The
Add leading zeros
and
Number length
fields become available
when you select the following:
Document ID, Page Sequence
Number, Image Sequence Number, Image Address Level 1, Image
Address Level 2,
or
Image Address Level 3.
When selecting
Page
Sequence Number
or
Image Sequence Number
you will also have
the option to specify when the page or image sequence number should
be reset and the value to which it should be reset.
•
To remove an item from the stamp string formula, click
Delete Item
.
•
To delete an entire formula from the stamp string formula, click
Delete
Formula
.
3. When finished defining your stamp string, click
OK
.
4. Define the location of the stamp string by specifying the placement of the
image stamp on either side of the page.
Margin
defines the size of the
border between the text and adjacent page edge(s), either from the right or
left edge horizontally and top or bottom edge vertically. If
Middle
is
selected, the margin in only applied to the vertical dimension.
5. Select the desired font size:
16
or
18
.
