7-4
A-61635 December 2010
Auto Delete tab
The Auto Delete tab allows you to set options for automatically deleting an
image. You may want to delete images with no content, or possibly very busy
pages (e.g., the back of a form which has a lot of explanatory text on it). Auto
deletion settings are specified independently for front and back images.
If you are doing simultaneous scanning of both color/grayscale and black and
white image types, auto deletion settings are also set independently.
Therefore, you can choose to delete one type of image or both.
When using Auto Delete, it is recommended that you scan some
representative documents which you would want to delete by using the
Test
option. The results of the Test option will help you determine if you should set
the auto delete values using the
Image size (byte) is
option or the
Image
content (%)
option. For more information see the next section “Testing your
settings”.
•
Image size (byte) is
Above
— select this option if you want to delete pages
with a lot of busy, explanatory content on them. For example, if you are
scanning documents with similar content (e.g. insurance forms) on the front
and back page, and the front page has content you need to keep, but the
back page contains instructions on how to file a claim (that you do not need
to keep), enter the number of bytes that you want Capture Pro Software to
delete any image file greater than that amount. Any image that is more than
this value will be considered too large and will be delete
d.
•
Image size (byte) is Below
— select this option if you want to delete pages
with no content or very little content. Enter the number of bytes that Capture
Pro Software will consider the image size to be blank. Any image that is less
than this value will be considered blank and will be deleted.
