A-61635 December 2010
4-95
Image address tab
Image addressing allows you to create counters within your job setup for each
batch, document, and page. These counters will create a unique image
address for each image as it is being scanned. Depending on your settings,
the image address will contain an identification of its batch, its document, and
its own number within the batch, along with a fixed value, such as a date or
location name.
Template
— up to four fields can be defined. The maximum length for each
image address field is 9. The combined length of all image address fields
cannot exceed 27 characters. This results in a maximum image address length
of 30 characters (with a period (.) delimiter between each field). Enter a width
value of 0 to disable an image address field. The default setting of all image
fields widths set to 0 will disable image addressing in the scanner.
The i800 Series Scanners have more options available for image addressing
schemes with the following guidelines:
• Only one field may be assigned to a level. You are only allowed one level 1
field, one level 2 field, and one level 3 field.
• There is no requirement to have any level field.
Field width
— there are four image address fields that make up the image
address format:
•
Fixed
— a static field containing ASCII text that does not increment or
change during scanning.
•
Level 3
— a counter that is associated with the numeric portion of the batch
name within Capture Pro Software. Whenever a Level 3 page is scanned,
Capture Pro Software will automatically create a new batch and discard the
Level 3 page.
•
Level 2
— a counter that is associated with the document number of the
current batch in Capture Pro Software. Whenever a Level 2 page is
scanned, Capture Pro Software will automatically create a new document.
