A-61635 December 2010
4-97
•
Set image address on new batch
: sets the image address value when a
new batch is manually created in Capture Pro Software. This option does
not affect the image address when batches are automatically created in
Capture Pro Software (e.g., blank page separation, bar code separation). By
default, the image address default value for a new batch will be as follows:
-
Fixed field:
the default value as defined in this dialog box.
-
Level 3
: the batch number portion of the Capture Pro Software batch
name (e.g., a value of 19 if the batch name is Batch019).
-
Level 2:
Capture Pro Software document number for the first document
in the batch.
-
Level 1: 0
if the image address format is Level 2 or Level 3.
1
if the
image address format is Level 1.
In addition, with sufficient privileges, the user will have the opportunity to
override the default image address value when the batch is created.
•
Set image address on scanner start
: automatically resynchronizes the
scanner image address with the current scan batch in Capture Pro Software
every time the scanner is started. The image address value is set to what
the image address should be for the next scanned page. This option is only
available when
Set image address on new batch
is enabled.
When the scanner image address is resynchronized, the image address
fields will be set to the following:
-
Fixed field:
will not change from the current scanner value.
-
Level 3
: the batch number portion of the
Kodak
Capture Pro Software
batch name.
-
Level 2
: the current Capture Pro Software document number.
-
Level 1
: the number of pages in the current document if the image
address format is Level 2 or Level 3. Number of pages in the current
do 1 if the image address format is Level 1.
NOTE: When simultaneous scanning,
Set image address at scanner
start
is not recommended. This is because the number of pages in
the current document is not correctly maintained by Capture Pro
Software when simultaneous scanning. As a result, the Level 1
portion of the image address can easily get out of sync.
