Appendix E: IEEE-488 conformance
Model 6517B Electrometer Reference Manual
E-2
6517B-901-01 Rev. C / August 2015
Information
The IEEE-488.2 standard requires specific information about how the Keithley Instruments Model
6517B Electrometer implements the standard. Paragraph 4.9 of the IEEE-488.2 standard
(Std 488.2-1987) lists the documentation requirements. The following table provides a summary of
the requirements, and provides the information or references the manual for that information.
IEEE-488 documentation requirements
Item
Number Requirement
Description
or
reference
(1)
IEEE-488 interface function codes
See
IEEE-488 bus overview
(on page D-1)
(2)
Behavior of 6517B when the address
is set outside the range 0-30
Cannot enter an invalid address
(3)
Behavior of 6517B when valid address
is entered
Address changes and bus resets
(4)
Power-on setup conditions
Determine by
:SYSTem:POSetup
(see
SCPI
command reference
(on page 14-1))
(5)
Message exchange options:
(a)
Input buffer size
256 bytes
(b)
Queries that return more than one
response message unit
None
(c)
Queries that generate a response
when parsed
All queries (common commands and SCPI)
(d)
Queries that generate a response
when read
None
(e)
Coupled commands
See the following table
(6)
Functional elements required for SCPI
commands
Contained in SCPI command subsystems tables (see
SCPI command reference
(on page 14-1))
(7)
Buffer size limitations for block data
Block display messages: Top display = 20 characters
max, bottom display = 32 characters max
(8) Syntax
restrictions
See
Remote operations
(on page 11-1)
(9)
Response syntax for every query
command
See
Remote operations
(on page 11-1)
(10)
Device-to-device message transfer
that does not follow rules of the
standard
None
(11)
Block data response size
See
Remote operations
(on page 11-1)
(12)
Common commands implemented by
6517B
See
Common commands
(on page 12-1)
(13)
Calibration query information
See
Calibration procedure
(on page 15-1)
(14)
Trigger macro for
*DDT
Not applicable
(15)
Macro information
Not applicable
(16)
Response to
*IDN
(identification)
See
Common commands
(on page 12-1)
(17)
Storage area for
*PUD
and
*PUD?
Not applicable
(18)
Resource description for
*RDT
and
*RDT?
Not applicable
(19)
Effects of
*RST, *RCL,
and
*SAV
See
Common commands
(on page 12-1) and
SCPI
Command Reference
(on page 14-1)
Содержание 6517B
Страница 136: ...Section 6 Test sequences Model 6517B Electrometer Reference Manual 6 8 6517B 901 01 Rev C August 2015...
Страница 180: ...Section 9 Filters and math Model 6517B Electrometer Reference Manual 9 4 6517B 901 01 Rev C August 2015...
Страница 492: ...In this appendix Information E 2 Appendix E IEEE 488 conformance...