85
Cinemage User Manual
Version 4.1.x ©2010
Profiling Options: Gamut Controlled
Main Menu: Setup Menu: Video & Display Setup: More Display Setup Menu
↑
Pressing the Profile Options button will give you the following menu:
Main Menu:
System Setup: Video & Display Setup: More Display Setup Menu: Profile Options
Source
Selects the source routed to the display
Flat Field Generator
Selects the flat field to be routed to the display. Pressing this button will
automatically route the Flat Field generator to the display. Choices of flat fields
include Red, Green, Blue, 100% White, Black, and 17 steps of Grey.
Flat Field Enable
Turns on and off the Flat Field Generator. If the Flat Field Generator is routed to
the display and you disable it, the previously routed signal will be routed to the
display.
Auto Read Probe
Turning on the Auto Read Probe will open a subscript under the back button
IN
THIS MENU ONLY
. Once your probe has been calibrated in the Measure menu,
the probe will make periodic readings of the display. This can be used in
conjunction with the Flat Field Generator button to measure Chromaticity and
Linearity across the grey scale.
Dual Link
[OPTION]
This menu toggles the Dual Link Modes in the monitor.
Back
Adjust Calibration
Settings
Profiling Options
Manual Calibration Adjustments
Blue Only Mode
Measure
Backlight Brightness:
20%
Back
Source:
SDI 1
Flat Field Generator:
100% White
Flat Field Enable:
On
Auto Read Probe:
OFF
Dual Link:
4:2:2 YCbCr Single-Link
