8
Cinemage User Manual
Version 4.1.x ©2010
4) Along the right side of the monitor, there are six screws that need to be
removed (only the screws that are attached to the front housing, there is one
screw that is not supporting the housing that can be left in.)
5) There are five additional screws along the bottom of the monitor that need to
be removed to remove the bezel.
6) Carefully remove the front bezel by pulling up and toward yourself.
7) You can now clean between the glass and the LCD panel. It is recommended
that when cleaning inside the monitor to use compressed air. Many glass
cleaners will leave streak marks on the glass, and compressed air needs to
be used for the LCD panel as not to damage it.
8) After cleaning, replace the front bezel and replace all the screws.
Instructions on how to remove the front bezel on Cinemage B Series Monitors:
1) With the monitor standing upright, locate the 4 screws around the front bezel
holding the glass to the main unit.
2) If you are facing the front of the unit, there are two screws on both the left and
right hand sides.
3) Carefully remove the front bezel by pulling toward yourself.
4) You can now clean between the glass and the LCD panel. It is recommended
that when cleaning inside the monitor to use compressed air. Many glass
cleaners will leave streak marks on the glass, and compressed air needs to be
used for the LCD panel as not to damage it.
Turning On the Cinemage and Cinemage B Series monitors:
To turn the system on, simply depress the power toggle switch on the rear of the
system.
**Note: To protect the system from erratic power outages the system requires a 10
second wait period between power down and immediate power up.
