116
Cinemage User Manual
Version 4.1.x ©2010
Press and hold to enter Advanced options for Dual Link Mode:
Main Menu:
Route Menu: Dual Link Advanced Mode
Back
Returns to the previous menu
Calibration Type
Changes between Full Gamut Mode, and Gamut Controlled Mode
Current Calibration
Allows you to choose the current monitor calibration
Dual-Link Mode
Allows user to change between the Dual-Link modes of the monitor
Input Limiting Mode
Allows you to change the Input Limiting Mode between undershoot limited only,
full range, undershoot & overshoot limited
Resizer Option
Allows you to change the resizer options on the input
NOTES:
It is possible to create circular routing that would generate feedback. An
example would be routing the framestore as a source to the 3D LUT and the 3D
LUT output to the framestore. It should also be noted that because Quad Split
utilizes the resources of the Framestore, it is not possible to output the
Framestorefrom either of the HD-SDI outputs while viewing Quad Split on the
display. However, viewing Quad Split on the display is the only way to output the
Quad Split through either of the HD-SDI outputs.
Note that in most cases dual-link video is full range, NOT SMPTE range. The
input range is controlled in the Video Setup menu with the Input Limiting Mode.
In most cases for dual link this should be set to "FULL RANGE".
Back
Calibration Type
Current Calibration
Dual-Link Mode
Input Limiting
Mode
Resizer Option:
