27
Cinemage User Manual
Version 4.1.x ©2010
B Setup –
When entering this menu, you are given another set of menus
including: Enable, Type, Scale, Position, Style, and Back/Exit.
Enable –
Options in this menu are Off, On, and Back/Exit. Press right on
either Off or On to choose option.In order to go Back, press left when
Back/Exit is selected, in order to Exit, press right.
Type –
Options in this menu are: Custom, 1.33:1, 1.55:1, 1.77:1, 1.86:1,
2.35:1, 1.33:1 Safe Title, 1.33:1 Safe Action, 1.55:1 Safe Title, 1.55:1 Safe
Action, 1.77:1 Safe Title, 1.77:1 Safe Action, and Back/Exit. When
choosing any of these options, press right on the directional pad to make
your choice, when the option is highlighted. In order to go Back, press left
when Back/Exit is selected, in order to Exit, press right.
Scale –
When entering this menu, there will be on screen directions. The
Brightness knob will control the width of the Marker, and the Contrast knob
will control the height of the Marker. There is also a Back/Exit option. In
order to go Back, press left when Back/Exit is selected, in order to Exit,
press right.
Position –
In this menu, you will use the top two dials to control the
position of the Marker. The Backlight Dial will control the X Position
(PosX), and the Contrast Dial will control the Y Position (PosY). When
moving the position of a marker, you are controlling the position of the top
left corner of the marker, so make all your decisions based off of this point.
There is also a Back/Exit option. In order to go Back, press left when
Back/Exit is selected, in order to Exit, press right.
Style –
In this menu, there are two style options to choose from. White or
Luma Mod can be chosen by pressing right on the directional pad, when
the selection is highlighted. There is also a Back/Exit option. In order to go
Back, press left when Back/Exit is selected, in order to Exit, press right.
Back/Exit –
In order to go Back, press left when Back/Exit is selected, in
order to Exit, press right when the option you want to enter is highlighted.
Mask Setup –
When entering this menu, there are three options: Masked Area,
Mask Style, and Back Exit. To enter either of the mask options, press right on
the directional pad. In order to go Back, press left when Back/Exit is selected, in
order to Exit, press right.
Masked Area –
There are three options in this menu: Inner, Outer, and
Back/Exit. Inner will mask the inside of your Marker. Outer will mask the
outside of your Marker. In order to select an option, press right on the
directional pad when the option you want is highlighted. In order to go
