58
Cinemage User Manual
Version 4.1.x ©2010
Sync Source
This function sets the sync master for the entire unit. You may choose between
Free run
,
Analog
or
SDI
. If
SDI
is selected the
SDI Timing Master
Menu will
appear in the menu bar. The user can then select from any of the
HD SDI
inputs
or
Automatic
. In the
Automatic
mode Sync will follow whatever valid sync is
routed to the display.
SDI Timing Master
When “Sync Source” is set to SDI you can choose which SDI input is the sync
source. Automatic mode automatically selects the timing from whatever source is
routed to the display.
Current Format
Automatically detects and displays the input format to the monitor. The Current
Format Setup Menu (Hold and release to access this menu) provides the ability
turn off the automatic detection mode and manually set the format when using
the monitor to output test pattern signals or Framestore stills. Auto Format can
only be disabled if there is no video signal on the selected input
to prevent
viewing irregularities, however if Auto Format is turned on with no video
connected, it will disable the Framestore until a valid video source is attached to
the monitor.
Input Limiting Mode
Cinemage allows you to control how the information above and below peak white
is displayed. The following choices are available:
Full Range:
Provides viewing of the full legal value data range on the display. This
means that data values below legal black are visible and data values
above legal white are visible.
Undershoot & overshoot limited:
Clips values below legal black (16 for 8 bit data, 64 for 10 bit data) and
clips values above legal white (240 for 8 bit data, 960 for 10 bit data).
Undershoot limited only:
Clips values below legal black (16 for 8 bit data, 64 for 10 bit data)
