137
Cinemage User Manual
Version 4.1.x ©2010
↑
System Menu: Display Menu: Test Pattern Generator
Segment Pattern Control
Enters the Segment Pattern Control Menu, which allows you to assign up to 4 different Test
Patterns to horizontal segments of the screen, as well as assign a separate pattern to the upper
portion of the screen.
Segment Size Control
Enters the Segment Size Control menu, which allows you to adjust the height of the horizontal
segments of the display to customize your test pattern.
Flat Field Generator
Enters the Flat Field Generator Menu, which allows you to manipulate the R, G, and B color
components of any of the Flat Field Test Patterns.
Full Screen Generator
Using the USB Mouse or the trackball you can cycle through available test patterns and apply
them to the full display. The included Test Patterns are:
1.
8% GREY
2.
100% FULL-RANGE BARS
3.
75% FULL-RANGE BARS
4.
100% SMPTE-RANGE BARS
5.
75% SMPTE-RANGE BARS
6.
LUMA FULL-RANGE RAMP
7.
RED RAMP
8.
GREEN RAMP
9.
BLUE RAMP
10.
LINEAR RAMP
11.
RED LINEAR RAMP
12.
GREEN LINEAR RAMP
13.
BLUE LINEAR RAMP
14.
BLUE - YELLOW RAMP
15.
RED - CYAN RAMP
16.
COMBINED COLOR RAMPS
17.
30 MHZ FREQUENCY SWEEP
18.
5, 10, 15, 20, 25, 30 MHZ MULTIBURST
19.
PLUGE PATTERN
20.
LUMA PULSE & BAR
21.
LUMA TEN-STEP
22.
LINE-END MARKER PATTERN
23.
BLACK TEST BARS
24.
SMPTE-RANGE BLACK TEST BARS
25.
100% RED
26.
100% GREEN
27.
100% BLUE
28.
100% WHITE
29.
BLACK
Note:
The test patterns are all *
internal
* to the monitor, and are thus not corrected by the input range control or the input
LUT. This means that the internal PLUGE cannot be used to test black levels; use the pixel analysis tools to do this
instead.
Back
Segment Pattern
Control
Segment Size Control
Flat Field Generator
Hold & Release for Setup
Full Screen Generator
