manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 226 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 226

NOTE

The Ethernet services of NE2 and NE4 are point-to-point transparent transmission services. See 

4.4

Configuring EPL Services on an Ethernet Transparent Transmission Board

 to set the parameters.

Step 3

Check whether the services are configured correctly. For the operation procedures, see Testing
Ethernet Service Channels.

l

Before testing the service connectivity between headquarters C1 and branch C2, set 

TAG

 of

PORT1 on the EFS8 board to 

Access

 and 

Default VLAN ID

 to 

100

.

l

Before testing the service connectivity between headquarters C1 and branch C3, set 

TAG

 of

PORT1 on the EFS8 board to 

Access

 and 

Default VLAN ID

 to 

200

.

NOTE

After the test, change the modified parameter values to the values specified in the service configuration.

Step 4

Enable the performance monitoring function of the NEs. For details, see Setting Performance
Monitoring Parameters of an NE.

Step 5

Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.

----End

Relevant Task

If the services are configured incorrectly and thus need to be deleted, see 

5.4.3 Deleting Ethernet

Private Line Services

.

4.7 Configuring VCTRUNK-Shared EVPL (VLAN) Services

When the data of multiple users without VLAN tags sent to a transmission network is transmitted
on the same VCTRUNK, the VCTRUNK-shared EVPL (VLAN) service is used to isolate the
data by adding VLAN tags. In this way, the bandwidth is shared on the SDH side.

4.7.1 Networking Diagram

The data of multiple Ethernet users received from the same station is transmitted on the same
VCTRUNK and isolated by using different VLAN IDs. In this way, the bandwidth is shared on
the SDH side.

4.7.2 Signal Flow and Timeslot Allocation

The services of multiple users that are received from different external ports on an Ethernet
board are tagged with different VLAN IDs and then transmitted on the same VCTRUNK. In
this way, the data of different users is isolated. After the data arrives at the sink node, the VLAN
tags are stripped.

4.7.3 Configuration Process

Ethernet switching boards are required on both the source and sink nodes for creating EVPL
services of different VLAN IDs. In this way, the packets received from different external ports
are added with different VLAN tags. As a result, the packets are isolated when they are
transmitted on the same VCTRUNK.

4 Configuring Ethernet Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

4-72

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов