manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 30 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 30

Button

Name

Description

Lock Terminal

Locks the current client.

Main Topology

Switches to the Main Topology.

Log Out

Logs out of the current session.

Views the topology
in full screen.

Views the current window in full
screen.

Browse Current
Alarm

Displays the 

Current Alarms

window.

SDH Protection
Subnet
Maintenance

Accesses the 

SDH Protection Subnet

Common Attributes

 window.

SDH Trail
Management

Accesses the 

SDH Trail

Management

 window.

SDH Trail Creation Accesses the 

SDH Trail Creation

window.

WDM Trail
Management

Accesses the 

WDM Trail

Management

 window.

Verify Policy

Verifies the validity of a configuration
policy before the policy is deployed on
devices.

Deploy Policy

Deploys a policy to the selected
devices or device groups.

Undeploy Policy

Undeploys all the policies in the
current policy package from the
selected devices and clear the related
commands deployed on these devices.

Discover Policy

Policy auditing is to audit the policy
configuration differences between the
NMS and device, so as to determine
whether the policy needs to be
deployed or discovered.

Audit Policy

Policy discovery is to recover the data
synchronized to the database to the
NMS for management.

Save

Saves a policy package.

1 Getting Started

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

1-10

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов