Huawei OptiX OSN 550 Скачать руководство пользователя страница 102

Страница: 102 / 470

Double-click the source NE (NE1) on the right of the main topology. The

Select Board

Port-Source

dialog box is displayed. Select the required SP3D board and

Tributary

Port

. Click

Double-click the sink NE (NE2) on the right of the main topology. Configure NE2 in the
same manner.

Select

Copy after Creation

and click

Apply

. In the

Operation Result

dialog box

indicating that the operation succeeded, click

Close

. Then, the

Copy

dialog box is

displayed.

Available Timeslots/Port

, select the ports from NE2-Slot3-SP3D-2(SDH_TU-2) to

NE1-Slot3-SP3D-5(SDH_TU-5), and click

Add

In the

Operation Result

dialog box indicating that the operation succeeded, click

Close

Optional:

In the

Operation Result

dialog box indicating that the operation succeeded,

click

Browse Trail

to query the created VC12 services.

Step 4

Optional:

Modify the parameters

SD Condition

Revertive Mode

, and

Switching Mode

for

the linear MSP.

NOTE

The parameter settings of the sink NE must be the same as those of the source NE.

When modifying

Switching Mode

Ensure that the protection group is in a proper state.

Ensure that the protection protocol is disabled.

Choose

Service

SDH Protection Subnet

Maintenance SDH Protection Subnet

from

the Main Menu to display the

SDH Protection Subnet Common Attributes

window.

Select the created linear MSP group. In the

Protection Subnet Maintenance

tab, select

all nodes, right-click and choose

Start/Stop Protocol

Stop

from the shortcut menu.

Click the

Protection Subnet Parameters

tab and modify the parameters

SD Condition

Revertive Mode

, and

Switching Mode

Click

Apply

. Then, click

Close

in the

Operation Result

dialog box indicating that the

operation succeeded.

After the parameters are modified, restart the protection protocol according to

Step 4.2

Step 5

Check whether the service configuration is correct. For details, see Verifying the Correctness
of the SDH Service Configuration.

Step 6

Enable the performance monitoring function of the NEs. For details, see Setting Performance
Monitoring Parameters of an NE.

Step 7

Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.

----End

3 Configuring SDH Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

3-20

Huawei Proprietary and Confidential

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Результаты поиска

Содержание OptiX OSN 550

Отзывы:

Huawei OptiX OSN 550, Руководство по настройке, Страница: 102 / 470

Результаты поиска

Содержание OptiX OSN 550

Отзывы: