manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 391 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 391

Relationship with Other Parameters

None.

7.71 Max Age(s)

Description

The 

Max Age(s)

 parameter specifies the maximum life cycle of the configuration message. A

configuration message contains the message aging time and maximum aging time of the
message. The maximum life cycle of the configuration message is equivalent to the maximum
aging time of the message.

Impact on the System

If the message aging time exceeds the maximum aging time of the message, the received message
is discarded and the port that receives the message becomes a designated port.

Values

Value Range

Default Value

Unit

6-40

20

s

 

Configuration Guidelines

When you set the value of this parameter, ensure that the following requirement is met:

2 x (Hello Time + 1) 

≤

 Max Age 

≤

 2 x (Forward Delay - 1)

Relationship with Other Parameters

This parameter is related to the 

Hello Time

 and 

Forward Delay

 parameters. For details, refer

to the principles for setting these parameters.

7.72 Hello Time(s) (Spanning Tree)

Description

The 

Hello Time(s)

 parameter specifies the transmission period of the message.

The bridge time consists of the following parts: forward delay of the bridge, handshake time of
the bridge, maximum bridge aging time, and message aging time (0). The 

Hello Time

 parameter

is equivalent to the bridge handshake time.

Impact on the System

This parameter ensures the stable operation of the STP.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

7 List of Parameters

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

7-61

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов