Huawei OptiX OSN 550 Скачать руководство пользователя страница 318

Страница: 318 / 470

5.3 Modifying the Fiber Configuration Data

You can modify the existing fiber configuration data.

If you need to delete an NE or change the links between NEs during network adjustment, delete
the related fiber connections between the NEs.

5.3.2 Changing Fiber/Cable Information

You can change the name, attenuation, length, and type of a fiber/cable according to its
connection status and physical features.

5.3.3 Deleting DCN Communication Cables

In certain scenarios such as network adjustment, you can delete the DCN communication cable
that is not applicable.

5.3.1 Deleting Fibers

If you need to delete an NE or change the links between NEs during network adjustment, delete
the related fiber connections between the NEs.

Prerequisite

You must be an NM user with "NE maintainer" authority or higher.

Procedure

Step 1

Choose

Inventory

Fiber/Cable

Fiber/Cable Management

from the Main Menu.

Step 2

Right-click the fiber you need to delete and then choose

Delete Fiber/Cable

from the shortcut

menu. Then, the

Warning

dialog box is displayed. Click

to delete the fiber.

Step 3

Click

Close

in the

Operation Result

dialog box indicating that the operation succeeded.

----End

5.3.2 Changing Fiber/Cable Information

You can change the name, attenuation, length, and type of a fiber/cable according to its
connection status and physical features.

Prerequisite

You must be an NM user with "NE maintainer" authority or higher.

Procedure

Step 1

Choose

Inventory

Fiber/Cable

Fiber/Cable Management

from the Main Menu. All the

fiber information is displayed in the right pane.

Step 2

Select a fiber, right-click and choose

Modify Fiber/Cable

from the shortcut menu. In the

Modify

Fiber/Cable

dialog box, you can modify

Name

Length(km)

Attenuation

Medium Type

5 Modifying the Configuration Data

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

5-8

Huawei Proprietary and Confidential

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Результаты поиска

Содержание OptiX OSN 550

Отзывы:

Huawei OptiX OSN 550, Руководство по настройке, Страница: 318 / 470

Результаты поиска

Содержание OptiX OSN 550

Отзывы: