Huawei OptiX OSN 550 Скачать руководство пользователя страница 52

Страница: 52 / 470

Procedure

Step 1

Choose

File

Discovery

Fiber

from the Main Menu.

Step 2

In the pane on the left, select one or more ports of the NE and click

Search

. Then, the progress

bar is displayed, indicating the progress of the search.

NOTE

If you select the

Do not search the ports with Fibers/Cable created on NMS

check box, the system

only searches for the ports that do not have fibers.

To check whether the created fibers are consistent with the actual fiber connection, deselect the

Do not

search the ports with Fibers/Cable created on NMS

check box.

If you select the

Do not search the ports with Fibers/Cable created on NMS

check box and if the

fibers are created for all the selected ports, a dialog box is displayed indicating that the search domain
is null.

Step 3

A dialog box is displayed, indicating that the operation is successful. Click

Close

Step 4

Select one or more fibers from the

Physical Fibers/Cable Link List

list and click

Create Fiber/

Cable

NOTE

When one or more fibers are selected from the

Physical Fibers/Cable Link List

list, the fibers that

conflict with the selected fibers are automatically displayed in the

Logical Fibers/Cable Link List

list. If there is any conflicting fiber, refer to Step 5 and delete the conflicting fiber before creating fibers.

During the fiber creation, if all the selected fibers are in

Already created

state, the system displays

the message

No fiber to create

Step 5

Select one or more conflicting fibers (namely, the fibers of which the

Conflict with logical link

(Y/N)

parameter is set to

Yes

in the

Misconnected Fibers/Cable

list) from the

Logical Fibers/

Cable Link List

list. Click

Delete Fiber/Cable

----End

2.4.2 Creating Fibers Manually

Before you configure services, you need to create the required fibers. You can create a small
number of fibers manually one after another.

Prerequisite

You must be an NM user with "NE maintainer" authority or higher.

The required boards must be created on each NE.

Procedure

Step 1

Right-click in the Main Topology and choose

New

Link

from the shortcut menu. Then, the

Create Link

dialog box is displayed.

Step 2

Choose

Fiber/Cable

Fiber

from the left pane.

Step 3

The parameter

Create Ways

can be set to

Common Ways

Batch Ways

. The default value

Common Ways

Step 4

Click the button in

Source NE

. Select the source board and source port in the

Select Fiber/

Cable Source

dialog box that is displayed.

2 Creating the Network

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

2-12

Huawei Proprietary and Confidential

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Результаты поиска

Содержание OptiX OSN 550

Отзывы:

Huawei OptiX OSN 550, Руководство по настройке, Страница: 52 / 470

Результаты поиска

Содержание OptiX OSN 550

Отзывы: