manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 74 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 74

Step 2

Click 

Query

 to query the related NE-side information.

Step 3

Set 

Call Waiting Time(s)

, 

Telephone No.

 and the orderwire ports.

NOTE

l

Call Waiting Time

 should be set to the same value for all NEs that are involved in the orderwire

communication. When the number of NEs is less than 30, set 

Call Waiting Time

 to 5s. Otherwise, set

Call Waiting Time

 to 9s.

l

The orderwire phone numbers must be unique to each other in the same orderwire subnet.

l

Set the length of the telephone number according to the actual requirements. The maximum length is
eight digits and the minimum length is three digits. In the same orderwire subnet, the number lengths
of the orderwire phone numbers must be the same.

l

The length of the telephone number must be the same as the length of the conference call number.

l

If the length of the subnet number is 1, the first digits of the two orderwire numbers must be the same.
If the length of the subnet number is 2, the first two digits of the two orderwire numbers must be the
same.

Step 4

Click 

Apply

. A dialog box is displayed, indicating that the operation is successful.

Step 5

Click 

Close

.

----End

2.9.2 Configuring the Conference Calls

The conference calls ensure one or more dedicated communication channels that the network
maintenance personnel can use in the case of emergencies.

Prerequisite

You must be an NM user with "network operator" authority or higher.

Procedure

Step 1

In the NE Explorer, select the NE, and then choose 

Configuration

 > 

Orderwire

 from the

Function Tree. Click the 

Conference Call

 tab.

Step 2

Click 

Query

 to query the conference call configuration of the NE.

Step 3

Set 

Conference Call Authorities

 to 

Able to Listen and Speak

 or 

Able to Listen but not

Speak

.

2 Creating the Network

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

2-34

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов