manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 305 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 305

Field

Value Range

Description

Bridge Learning
Mode

IVL, SVL
Default value: IVL (The
bridge type is compliant
with IEEE 802.1q or
IEEE 802.1ad), SVL
(The bridge type is
compliant with
IEEE802.1d or IEEE
802.1ad)

Bridge Learning Mode

 (

Ethernet LAN

Service

) indicates how the bridge learns

the MAC address. 

Bridge Learning

Mode

 is classified into the shared VLAN

learning and independent VLAN
learning modes. The shared VLAN
learning mode indicates learning and
forwarding based on the MAC address.
The independent VLAN learning mode
indicates learning and forwarding based
on the VLAN and MAC address.
You can click 

7.30 Bridge Learning

Mode (Ethernet LAN Service)

 to

Displays the detailed information.

Ingress Filter

Enabled
Default value: Enabled

Displays the status of the ingress filter
function.

Enabled

: The ingress port checks the

validity of VLAN IDs based on the VB.
If the packets received on the ingress port
do not belong to the VLAN of the VB
port, these packets are discarded.

MAC Address Self-
Larning

Enabled
Default value: Disabled

Indicates whether the MAC address
learning function is enabled.

Enabled

: MAC addresses can be learnt.

Active

Active

Displays the activation status of the VB.

 

Table 4-45

 Parameters for configuring service mount

Field

Value Range

Description

VB Port

For example: 1

Displays the VB port.
Allocated automatically when the VB
mount port is configured.

Mount Port

For example: PORT1

Displays the mount port. The mount
port may be the PORT port or VC
trunk port.

Port Type

For example: UNI

Displays the network attributes for a
port.
Value Range: UNI, C-Aware, S-
Aware. Default value: UNI

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

4 Configuring Ethernet Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-151

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов