Huawei OptiX OSN 550 Скачать руководство пользователя страница 101

Страница: 101 / 470

Step 3

Check whether the services are configured correctly. For details, see Verifying the Correctness
of the SDH Service Configuration.

Step 4

Enable the performance monitoring function of the NEs. For details, see Setting Performance
Monitoring Parameters of an NE.

Step 5

Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.

----End

Relevant Task

If the services are configured incorrectly and thus need to be deleted, see Deleting SDH Services.

3.4.4 End-to-End Configuration Process

This topic describes how to configure the 11+1 linear MSP services.

Prerequisite

The physical network topology must be set up.

The NEs, boards, and fibers must be successfully created on the U2000.

The protection subnet must be created and must be the same as the actual topology. For
details about how to create the protection subnet, see

2.6.4 Creating a Linear MS

Protection Subnet

The operator must understand the information provided in

3.4.2 Signal Flow and Timeslot

Allocation

Procedure

Step 1

Choose

Service

SDH Trail

Create SDH Trail

from the Main Menu.

Step 2

Create the VC-4 service-layer trail.
1.

Configure the parameters as follows. Set

Level

VC4 Server Trail

. The other parameters

take default values.

Double-click the source NE (NE1) and sink NE (NE2) on the right of the main topology
and click

Apply

. In the

Operation Result

dialog box indicating that the operation

succeeded, click

Close

Optional:

In the

Operation Result

dialog box indicating that the operation succeeded,

click

Browse Trail

to query the created VC4 service-layer trail.

Step 3

Create VC12 services.
1.

Create SDH Trail

, configure the parameters as follows. Set

Level

VC12

. The other

parameters take default values.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

3 Configuring SDH Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

3-19

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Результаты поиска

Содержание OptiX OSN 550

Отзывы:

Huawei OptiX OSN 550, Руководство по настройке, Страница: 101 / 470

Результаты поиска

Содержание OptiX OSN 550

Отзывы: