manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 328 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 328

6.1 Service Support Capability of Ethernet Boards

Ethernet boards are classified into Ethernet transparent transmission boards and Ethernet
switching boards, based on the type of the accessed service. The Ethernet transparent
transmission boards support only EPL services, whereas the Ethernet switching boards support
EPL services, EVPL services, and Layer 2 switching function.

Table 6-1

 Service support capability of Ethernet boards

Board Type

Board
Name

Supported EPL Service

Supported EPLAN Service

Ethernet
transparent
transmission board

EGT1

EPL

-

Ethernet switching
board

EFS8

EPL
EVPL

EVPLAN (IEEE 802.1q bridge), EPLAN
(IEEE 802.1d bridge), and EVPLAN (IEEE
802.1ad bridge)

 

6.2 Requirements for Binding Paths with VCTRUNKs on
Ethernet Boards

One VCTRUNK on an Ethernet board can only be bound with timeslots of the same level.

Table 6-2

 Requirements for binding paths with VCTRUNKs on Ethernet boards

Board

Requirement for Binding Paths with a VCTRUNK

EGT1

l

The VCTRUNKs can be bound with the VC-12 VC-3 and VC-4 paths.

l

Only one VCTRUNK with a maximum bandwidth of 1.25 Gbit/s is supported.

l

VCTRUNK1 can only be bound with the fourth VC-4, namely, VC4-4, if the path binding
is at VC-12 level.

l

VCTRUNK1 can be bound with the first to eighth VC-4s, namely, VC4-1 to VC4-8, if the
path binding is at VC-3 level.

EFS8

l

The VCTRUNKs can be bound with the VC-12 paths and VC-3 paths.

l

Eight VCTRUNKs are supported. The maximum bandwidth of each VCTRUNK is 100
Mbit/s.

l

VCTRUNK1 to VCTRUNK8 can only be bound with the fourth VC-4, namely, VC4-4, if
the path binding is at VC-12 level.

l

VCTRUNK1 to VCTRUNK8 can be bound with the first to fourth VC-4s, namely, VC4-1
to VC4-4, if the path binding is at VC-3 level.

 

6 Equipment Information

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

6-2

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов