manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 143 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 143

2.

Double-click the NE3 on the right of the Main Topology. The 

Select Board Port-

Source

 dialog box is displayed. Select the SP3D board to be configured and choose 

1

 on

Tributary Port

, and then click 

OK

.

3.

Configure NE5 using the method described in 

Step 4.2

.

4.

In 

Create SDH Trail

, click the 

SNCP Setting

 tab, right-click in the blank area, and choose

Add

 from the shortcut menu. In the 

Add the dual-fed and selective-receiving node

 dialog

box that is displayed, select NE3 as the dual-fed node and NE4 as the selective receiving
node, and then click 

OK

. In the 

Operation Result

 dialog box indicating that the operation

succeeded, click 

Close

.

5.

Select 

Copy after Creation

 and click 

Apply

. In the 

Operation Result

 dialog box

indicating that the operation succeeded, click 

Close

. Then, the 

Copy

 dialog box is

displayed.

6.

In 

Available Timeslots/Port

, select the ports from NE3-Slot5-SP3D-2(SDH_TU-2) to

NE5-Slot5-SP3D-5(SDH_TU-5), and click 

Add

.

7.

In the 

Operation Result

 dialog box indicating that the operation succeeded, click 

Close

.

8.

Optional: 

In the 

Operation Result

 dialog box indicating that the operation succeeded, you

can also click 

Browse Trail

 to query the created VC12 services.

Step 5

Check whether the service configuration is correct. For details, see Verifying the Correctness
of the SDH Service Configuration.

Step 6

Enable the performance monitoring function for NEs. For details, see Setting Performance
Monitoring Parameters of an NE.

Step 7

Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.

----End

Relevant Task

To delete any service that is incorrectly configured, see Deleting SDH Services.

3.10 Configuring Service on the MSP Ring with a Non-
Protection Chain

Configure the protection subnet for the MSP, Protection Subnet for the non-protection chain,
and services on the MSP ring with a non-protection chain separately. It is recommended that
you configure the protection subnets before configuring the services on the MSP ring with a
non-protection ring chain.

3.10.1 Networking Diagram

In the case of the MSP ring with a non-protection chain, the networking diagram of the MSP
ring is similar to the networking diagram of the single two-fiber bidirectional MSP ring. The
only difference is that one line board needs to be configured on the intersecting NE when the
non-protection chain is added. This can realize the pass-through of the services when the services
are required to be transmitted out of the MSP ring.

3.10.2 Signal Flow and Timeslot Allocation

To configure the service on the MSP ring with a non-protection chain, you should plan a proper
traffic direction and a timeslot allocation scheme for the services on the SNCP ring and the
services on the non-protection chain.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

3 Configuring SDH Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

3-61

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов