
Parameter
Value in
This
Example
Description
VLAN ID
(e.g.1,3-6)
100
According to the plan, the VLAN ID is set to 100 on
the transmission network side for EVPLAN services
between user G1, user G2, and user G3.
l
In
Available Forwarding Ports
, select PORT1, VCTRUNK1, and VCTRUNK2. Click
. Then, click
Apply
.
l
Create the VLAN filtering table for user H1, user H2, and user H3.
Parameter
Value in
This
Example
Description
VLAN ID
(e.g.1,3-6)
200
According to the plan, the VLAN ID is set to 200 on
the transmission network side for EVPLAN services
between user H1, user H2, and user H3.
l
In
Available Forwarding Ports
, select PORT2, VCTRUNK3, and VCTRUNK4. Click
. Then, click
OK
.
5.
Change the Hub/Spoke attribute of the ports mounted to the bridge.
l
Select the created bridge and click the
Service Mount
tab.
l
Change the Hub/Spoke attribute of the port mounted to the bridge. After setting the
parameters, click
Apply
.
Parameter
Value in This
Example
Description
Hub/Spoke
PORT1: Hub
VCTRUNK1:
Spoke
VCTRUNK2:
Spoke
PORT2: Hub
VCTRUNK3:
Hub
VCTRUNK4:
Hub
If user G2 need not communicate with user G3,
set VCTRUNK1 and VCTRUNK2 ports that
receive the services of user G2 and user G3 to
Spoke. Ports of the Spoke attribute cannot
communicate with each other. A port of the Hub
attribute can communicate with a port of the
Spoke or Hub attribute.
6.
Configure the cross-connections from the Ethernet service to the SDH link for user G2,
user G3, user H2, and user H3.
l
In the NE Explorer, select NE1, and then choose
Configuration
>
SDH Service
Configuration
from the Function Tree.
l
Click
Create
on the lower-right pane to display the
Create SDH Service
dialog box.
Set the parameters as follows.
4 Configuring Ethernet Services
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
4-110
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-06-30)