manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 357 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 357

Values

Board Name

Valid Values

Default Value

EFS8

l

For bidirectional services, the options are as
follows:

–

Add S-VLAN

–

Transparently Transmit C-VLAN

–

Transparently Transmit S-VLAN

–

Transparently Transmit S-VLAN and C-
VLAN

–

Translate S-VLAN

l

For unidirectional services, the options are as
follows:

–

Add S-VLAN

–

Transparently Transmit C-VLAN

–

Transparently Transmit S-VLAN

–

Transparently Transmit S-VLAN and C-
VLAN

–

Translate S-VLAN

–

Strip S-VLAN

Add S-VLAN

 

The following table lists the description of each value.

Value

Description

Add S-VLAN

Indicates that the one layer of S-VLAN label is added to the
processed packets in the service.

Translate S-VLAN

If the source S-VLAN labels of the packets processed in the
service are translated into the sink S-VLAN labels, the source
S-VLAN label must be different from the sink S-VLAN label.

Transparently transmit S-
VLAN

Forwards the service packets according to the port or S-VLAN.
After the packets are processed in the service, the S-VLAN
labels in the packets are not changed.

Transparently transmit C-
VLAN

Forwards the service packets according to the port or C-VLAN.
After the packets are processed in the service, the C-VLAN
labels in the packet are not changed.

Transparently Transmit S-
VLAN and C-VLAN

Indicates that the Transparently transmit C-VLAN and
Transparently transmit S-VLAN labels are added to the packets
processed in the service.

Strip S-VLAN

Strips the S-VLAN label.

 

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

7 List of Parameters

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

7-27

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов