Huawei OptiX OSN 550 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 470

Huawei OptiX OSN 550 Скачать руководство пользователя страница 56

Step 7

Click

Finish

to deliver the configuration data. Click

Close

in the

Operation Result

dialog box

indicating that the operation succeeded.

----End

2.6.2 Configuring a Non-Protection Ring

When services on a ring need not be protected, you can configure a non-protection (NP) ring.
All timeslots on the ring can be used to transmit services.

Prerequisite

l

You must be an NM user with "NE maintainer" authority or higher.

l

The NE data must be configured, and fibers must be created properly.

Procedure

Step 1

Choose

Service

>

SDH Protection Subnet

>

Create Unprotected Ring

from the Main Menu.

Then, the

Create Protection Subnet

dialog box is displayed.

Step 2

Enter the name of the protection subnet.
Generally, the default name is used, for example, NP_Ring_1.

Step 3

Select the capacity level of the protection subnet,
for example, STM-4.

Step 4

Select

Resource Sharing

and

Assigned by VC4

according to the requirement.

NOTE

l

If multiple protection subnets uses one port of a board, you need to check the

Resource Sharing

check

box. If different protection subnets use different ports of a board, do not check this check box.

l

Select the

Assigned by VC4

option when there are different VC4s belonging to different protection

subnets to achieve virtual optical path protection.

Step 5

Select the nodes that belong to the protection subnet that needs to be created. Double-click the
selected NE in the Main Topology to add the NE to the NE list on the left. In addition, is
displayed on the NE icon. If you need to cancel the selection, double-click the NE again.

Step 6

Click

Next

. Set the parameters such as

Physical Link Information

in the window.

Step 7

Click

Finish

to deliver the configuration data. Then, click

Close

in the

Operation Result

dialog

box indicating that the operation succeeded.

----End

2.6.3 Creating an MS Ring Protection Subnet

Generally, the MS ring protection is configured on the public ring network whose protection
paths are used to transmit extra services. By running the APS protocol, it achieves the MS level
protection.

Prerequisite

l

You must be an NM user with "NE maintainer" authority or higher.

l

The NE data must be configured and fibers must be created properly.

2 Creating the Network

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

2-16

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

«
...
54
55
56
57
58
...
»

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов