Huawei OptiX OSN 550 Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 470

Huawei OptiX OSN 550 Скачать руководство пользователя страница 89

Parameter

Value in
This
Example

Description

Sink Slot

1-SL1D-1
(SDH-1)

In this example, the SL1D board in slot 1 of NE1 is
configured as the sink line board. See

Sink VC4

VC4-1

The service sink uses the timeslots of VC4-1.

Sink Timeslot
Range(e.g.1,3-6)

1-5

In this example, five E1 services are configured between
NE1 and NE2. Hence, the service sink occupies VC-12s
1-5.

Activate
Immediately

Yes

-

Step 3

Check whether the services are configured correctly. For details, see Verifying the Correctness
of the SDH Service Configuration.

Step 4

Enable the performance monitoring function of the NEs. For details, see Setting Performance
Monitoring Parameters of an NE.

Step 5

Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.

----End

Relevant Task

If the services are configured incorrectly and need to be deleted, see Deleting SDH Services.

3.2.4 End-to-End Configuration Process

The configuration of services on a non-protection chain is independent of the creation of the
protection subnet. To configure the services on the non-protection chain, configure the SDH
services from the tributary board to the line board on the source and sink NEs if the protection
subnet is already created.

Prerequisite

l

The physical network topology must be set up.

l

The NEs, boards, and fibers must be successfully created on the U2000.

l

The protection subnet must be created and must be the same as the actual topology. For
details about how to create the protection subnet, see

2.6.1 Configuring a Non-Protection

l

The operator must understand the information provided in

3.2.2 Signal Flow and Timeslot

Procedure

Step 1

Choose

Service

>

SDH Trail

>

Create SDH Trail

from the Main Menu.

Step 2

Create the VC-4 service-layer trail.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

3 Configuring SDH Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

3-7

«
...
87
88
89
90
91
...
»

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов