manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 294 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 294

Field

Value Range

Description

Level

For example: VC12-xv

Specifies the level of a path
that is bound with the
VCTRUNK.

Service Direction

Bidirectional, Uplink,
Downlink
Default value: Bidirectional

Specifies the direction of the
Ethernet service.

Bound Path

For example: VC4-1-VC12
(1-3)

Specifies the number of the
path to be bound.

Bound Path Count

For example: 3

Displays the number of
VCTRUNKs to be bound.

Used Channel

For example: Uplink:VC4-3-
VC3(1-3):3
Downlink:VC4-3-VC3(1-3):
3

Displays the actually used
channel.

Activation Status

Active, Deactive

Displays whether the path is
active.

Display in Combination

-

If you select 

Display in

Combination

, the bound

paths are displayed in a
centralized manner.
Otherwise, the bound paths
are displayed in a distributed
manner.

 

4.12 Ethernet Service Configuration Parameters

Ethernet services can be classified into Ethernet private line services and Ethernet private
network services. Ethernet private line services include EPL services and EVPL services.
Ethernet private network services include EPLAN services and EVPLAN services.

4.12.1 Configuring Ethernet Private Line Services

This topic describes the parameters, such as operation type, service type, and encapsulation
format of the P port, that are used for configuring Ethernet private line services.

4.12.2 Configuring Ethernet Private Network Services

This section describes the parameters for configuring Ethernet private network services.

4.12.1 Configuring Ethernet Private Line Services

This topic describes the parameters, such as operation type, service type, and encapsulation
format of the P port, that are used for configuring Ethernet private line services.

Table 4-43

 lists the parameters that are used for configuring Ethernet private line services.

4 Configuring Ethernet Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

4-140

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов