manualshive.com logo in svg

Huawei OptiX OSN 550, Руководство по настройке, Страница: 321 / 470

Поделиться
Скачать
Huawei OptiX OSN 550 Скачать руководство пользователя страница 321

6.

Click 

OK

. Then, the 

Operation Result

 dialog box is displayed, indicating that the

operation is successful.

7.

Click 

Close

.

Step 8

Optional: 

To modify the SDH service, delete the service and then create the service again.

1.

Select the service that you need to modify and click 

Delete

.

2.

Click 

OK

. Then, the 

Operation Result

 dialog box is displayed, indicating that the

operation is successful.

3.

Click 

Close

. The service is deleted.

4.

Create the service again according to the requirements. For details, see Creating SDH
Services.

----End

5.4.2 Deleting SDH Services

You can delete an existing SDH service.

Prerequisite

You must be an NM user with "NE operator" authority or higher.

Procedure

Step 1

In the NE Explorer, select an NE and choose 

Configuration

 > 

SDH Service Configuration

from the Function Tree.

Step 2

Click 

Query

 to query the existing services.

Step 3

If the service to be deleted is active, you should deactivate the service first. Select the service
that you need to delete and click 

Deactivate

.

CAUTION

Deactivation interrupts the services.

Step 4

Select the service to be deleted and click 

Delete

.

Step 5

Click 

OK

 in the 

Confirm

 dialog box that is displayed.

Step 6

Click 

Close

 in the 

Operation Result

 dialog box indicating that the operation succeeded.

----End

5.4.3 Deleting Ethernet Private Line Services

Ethernet private line services need to be deleted when the Ethernet boards that are configured
with the Ethernet private line services need to be deleted or when the service configuration is
incorrect.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

5 Modifying the Configuration Data

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

5-11

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов