Hioki IM3536 Скачать руководство пользователя страница 17

Страница: 17 / 270

Operating Precautions

Shipping precautions

Hioki disclaims responsibility for any direct or indirect damages that may occur when this instrument

has been combined with other devices by a systems integrator prior to sale, or when it is resold.

Handling the Instrument

This instrument may cause interference if used in residential areas. Such use must be avoided un

less the user takes special measures to reduce electromagnetic emissions to prevent interference

to the reception of radio and television broadcasts.

DANGER

To avoid electric shock, do not remove the instrument’s case. The internal com-

ponents of the instrument carry high voltages and may become very hot during

operation.

CAUTION

•

Note that the instrument may be damaged if the applied voltage or current exceeds

the measurement range.

•

Do not use excessive force on the touch panel, and do not use sharp objects that

could damage the touch screen.

• Do not apply heavy downward pressure with the stand extended. The stand could be

damaged.

•

If the instrument exhibits abnormal operation or display during use, review the infor

mation in “11.2 Troubleshooting” (p. 223) and “1 1.3 Error Massage and Error Dis

play” (p. 230) before contacting your dealer or Hioki representative.

•

To avoid damage to the instrument, protect it from physical shock when transporting

and handling. Be especially careful to avoid physical shock from dropping.

•

After use, always turn OFF the power.

Before Turning Power On

WARNING

•

Before turning the instrument on, make sure the supply voltage matches that

indicated on its power connector. Connection to an improper supply voltage

may damage the instrument and present an electrical hazard.

•

To avoid electrical accidents and to maintain the safety specifications of this

instrument, connect the power cord provided only to a 3-contact (two-conductor

+ ground) outlet.

•

Be sure to ground the power cord. Failure to do so will cause the enclosure to

have a voltage equal to half the supply voltage, resulting in electric shock.

•

To avoid shock and short circuits, turn off all power before connecting probes or cords.

CAUTION

Do not connect the supply voltage improperly. Doing so may destroy the instrument’s

internal circuitry.

DC resistance measurement only

To suppress noise, the instrument needs to be set to match the frequency of the power source. Before

operating, set the instrument to the frequency of your commercial power. If the supply frequency is not set

properly, measurements will be unstable.

See “Line frequency (DC)” (p. 54).

Содержание IM3536















































































































































































































































































Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды

Hioki IM3536, Инструкция по эксплуатации

Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды