GE Voluson 730Pro, Основное руководство пользователя

Страница: 357 / 480

Sonoview
Select the destination desired and click the
[
Send
]
button.
To add a new destination, click the
[
Add
]
button, enter the information and click the
[
OK
]
button.
To confirm or modify the information concerning the destination, highlight the destination and click
the
[
Modify
]
button.
For further details review System Setup:
To specify a DICOM Address (chapter 17.3.8.1)
An image can be sent through 4 storage servers at the same time.
Test Connection: Test the connection to a DICOM station (destination).
First select the station to be tested using the right or left trackball key, then click the
[
Test
]
button. If
the TCP/IP connection to the remote station is active, the entry "Normal" will appear in the
[
Ping
]
column. If the DICOM server on the remote station is active, the entry "Normal" will appear in the
[
Verify
]
column.
This connection test may take up to 30 seconds.
After completing the procedure, click the
[
Send
]
button.
The selected exam is sent to the destination by the system.
15.3.10 DICOM Print
DICOM Selective Print
It is possible to print out image(s) selectively to a printer that is connected to the DICOM network.
Move the cursor to the individual image which to be printed. Then press the right trackball key
[
Set
]
.
To select multiple images, hold down the [Ctrl] key on the alphanumeric keyboard and select each
image with the right trackball key
[
Set
]
.
Click this icon. The number of selected images is displayed on the screen.
Click the
[
OK
]
button.
Voluson
®
730Expert - Basic User Manual
105850 Rev. 0
15-17