GE Voluson 730Pro Скачать руководство пользователя страница 282

Страница: 282 / 480

Basic Measurements

13.4.2

1 Di Ellipse Measurement

To measure volume using one Distance and Ellipse.

1. Select

the

[

Dist. & Ellipse

]

item.

2. Move the cursor to the start of the measurement and press the right or left trackball key.

A second cursor appears.

3. Move the second cursor to the second point of the measurement and press the right or left

trackball key.

4. To re-adjust the start point, press the upper trackball key. It alternates between the cursors.

An Ellipse appears, the axis of which is defined by the two points.

5. Adjust the width of the ellipse and press the right or left trackball key.

The measurement result will be displayed.

6. When using single image mode, make first measurement.

Press

[

Freeze

]

to return to scan mode and scan the second image.

Press

[

Freeze

]

again. A new cursor appears.

7. Perform the measurement of the distance (axis) in the same manner.

Remarks:

•

The volume of the ovoid is displayed.

13.4.3

1 Distance Measurement

To measure a globe-like volume using one distance.

1. Select

the

[

1 Distance

]

item.

2. Move the cursor to the start of the measurement by the trackball and press the right or left

trackball key. A second cursor appears.

3. Move the second cursor to the second point of the measurement by the trackball and press the

right or left trackball key.
To re-adjust the start point, press the upper trackball key

[

Change

]

before completing the

measurement. It alternates the control from one cursor to the other.

Remarks:

•

The volume of the globe of the diameter defined by the two points is displayed.

Voluson

730Pro - Basic User Manual

13-8

105831 Rev. 0

Содержание Voluson 730Pro
































































































































































































































































































































































































































































































Результаты поиска

Содержание Voluson 730Pro

Отзывы:

Похожие инструкции для Voluson 730Pro

Бренды по названию

Популярные бренды

GE Voluson 730Pro, Основное руководство пользователя

Результаты поиска

Содержание Voluson 730Pro

Отзывы:

Похожие инструкции для Voluson 730Pro

Бренды по названию

Популярные бренды