manualshive.com logo in svg

Garmin G900X, Руководство по установке и обслуживанию, Страница: 273 / 681

Поделиться
Скачать
Garmin G900X Скачать руководство пользователя страница 273

 

G900X/G950 Installation and Maintenance Manual – Software, Configuration, and Calibration 

Page 15-31 

190-00719-00 

Revision D 

 

Active the Synthetic Vision feature by performing the following steps: 

1.

 

Insert the Synthetic Vision unlock card into the top slot of PFD1. 

2.

 

While holding the ENT key on PFD1, apply power by closing PFD1 circuit breaker. 

3.

 

When the words 

 appear in the upper left corner of the PFD, release 

the ENT key.  

4.

 

Repeat steps 2 and 3 for the MFD and PFD2 (if applicable). 

5.

 

On the PFD, select the SYSTEM Upload page using the FMS knob. 

6.

 

Activate the cursor and use the FMS knob to select CONFIGURATION FILES in the 
AIRFRAME field and press the ENT key. 

7.

 

Highlight the FILE field.  Use the FMS knob to select the “Enable Synthetic Vision” option and 
press the ENT key.  Once the option is selected, the configuration files in the PRODUCT field 
will be displayed. All files should be checked. If not, press the CHK ALL softkey. 

8.

 

Press the Load softkey.  Monitor the status of the upload. When the upload is finished, press the 
ENT key to acknowledge the upload complete confirmation. 

9.

 

View the SUMMARY field and ensure that the item is “COMPLETE”. 

10.

 

De-activate the cursor. 

11.

 

Cycle power to all displays and reboot the system.  

 

15.3.10 G900X/G950 Checklist Editor (if applicable) 

The G900X/G950 Checklist Editor is available for download on my.Garmin.com.  Refer to the Aviation 
Checklist Editor (ACE) User’s Guide (Garmin part number 190-00348-00) and the associated help files 
for instructions on how to add a checklist. 
 

NOTE 

The ACE file must be named “CHKLIST.ACE” for the system to recognize it. 

 

 

Содержание G900X










































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов