Fuji Electric ALPHA5 Smart, Руководство пользователя

Страница: 178 / 636

CHAPTER 4 PARAMETER
4-10
Basic Parameters
4
 Open collector input, forward/reverse pulse (reference value of parameter 03: 11)
The forward rotation pulse (CA, *CA) indicates the rotation amount in the forward direction, while
the reverse rotation pulse (CB, *CB) indicates that in the reverse direction.
 Differential input, A/B phase pulse (reference value of parameter 03: 2)
The A-phase signal (CA, *CA) and B-phase signal (CB, *CB) indicate the direction of rotation and
rotation amount, respectively. Each edge of the A-phase and B-phase signals corresponds to one
pulse. (It is four-fold frequency in the amplifier.)
 Open collector input, A/B phase pulse (reference value of parameter 03: 12)
The A-phase signal (CA, *CA) and B-phase signal (CB, *CB) indicate the direction of rotation and
rotation amount, respectively. Each edge of the A-phase and B-phase signals corresponds to one
pulse. (It is four-fold frequency in the amplifier.)
正転指令
*CA
*CB
逆転指令
上図の"ON"とは"トランジスタON"で信号レベル"Lo"を表します。
上図の矢印"↓"は、パルスを「１パルス」カウントするタイミングです。
90%
10%
t1 t3 t2
t4 t5
t1≦0.2[μsec]
t2≦0.2[μsec]
t3≧2[μsec］
t4≧2[μsec］
t5≧2.5[μsec]
ON ON ON
ON ON ON
Forward rotation command Reverse rotation command
"ON" specified in the figure above indicates activation of the transistor,
which means a low signal level.
Arrow mark "
↓ " in the figure above indicates the pulse count timing .
正転指令
CA
*CA
CB
*CB
逆転指令
上図の矢印"↑↓"は、パルスを「１パルス」カウントするタイミングです。
t1≦100[nsec]
t2≦100[nsec]
t3≧480[nsec]
t4≧480[nsec]
t9≧500[nsec］
t10≧500[nsec］
90%
10%
t1 t2
90%
10%
t9 t10
t3
t4
Forward rotation command Reverse rotation command
Arrow marks " ↑↓ " in the figure above indicate the pulse count timing.
正転指令
*CA
*CB
逆転指令
上図の"ON"とは"トランジスタON"で信号レベル"Lo"を表します。
上図の矢印"↓"は、パルスを「１パルス」カウントするタイミングです。
t1 t3 t2
t4
t1≦0.2[μsec]
t2≦0.2[μsec]
t3≧2[μsec］
t4≧2[μsec］
t9≧2.5[μsec]
t10≧2.5[μsec]
90%
10%
t10 t9
90%
10%
ON ON ON ON
ON ON ON ON
Forward rotation command
Reverse rotation command
"ON" specified in the figure above indicates activation of the
transistor, which means a low signal level.
Arrow mark "
↓ " in the figure above indicates the pulse count timing.