Epson 1400 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию, Страница: 78 / 168

EPSON Stylus Photo 1390/1400/1410 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly/Assembly Procedures 78
4.2.1 Removing the Housings
4.2.1.1 Rear Housing
1. Remove the IEEE Cover like opening it from the left.
2. Remove the four C.B.P. 3x10 screws and the C.B.S. 3x6 screw that secure the
Rear Housing, and remove the Rear Housing.
Figure 4-6. Removing the Rear Housing
4.2.1.2 Side Housing
1. Remove the Rear Housing. See Section 4.2.1.1 on page 78.
2. Insert a flat-blade screwdriver into the cutouts of the Lower Housing, and lift it in
the direction of the arrow to remove the Left Side Housing releasing the two tabs.
Remove the Right Side Housing in the same way.
Figure 4-8. Removing the Side Housing
Install the IEEE Cover to the Rear Housing, facing the side of the
rib to the right.
Figure 4-7. Installing the IEEE Cover
IEEE Cover
1) C.B.P. 3x10
(6±1 kgf.cm)
1) C.B.P. 3x10
(6±1 kgf.cm)
2) C.B.S. 3x6
(6±1 kgf.cm)
Rear Housing
Rib
Match the positioning holes of the Upper Housing with the guide
pins of the Side Housing.
Figure 4-9. Installing the Side Housing
Side Housing
Positioning
Holes
Tabs
Guide Pins
Cutouts