Epson 1400 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию, Страница: 107 / 168

EPSON Stylus Photo 1390/1400/1410 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly/Assembly Procedures 107
4.2.6.8 CD-R Release Lever Sub Assy
1. Remove the Paper EJ Frame Assy. See section 4.2.6.7 on page 106.
2. Remove the Shaft on the Right CD-R Release Base from the Bushing on the CD-R
Release Lever.
Figure 4-88. Removing the Right CD-R Release Lever Sub Assy (1)
„ Hook both rear ends of the Paper EJ Frame Assy onto the tabs
of the Main Frame.
„ Align the Bearing of the CD-R Release Level Sub Assy with the
Paper EJ Release Shaft.
Figure 4-87. Installing the Paper EJ Frame Assy
„ Match the tabs with the five Positioning Holes. See Figure 4-85.
„ Tighten the screws in the order shown in Figure 4-86.
A D J U S T M E N T
R E Q U I R E D
After replacing or removing the Paper EJ Frame Assy, the
following adjustment must be performed.
1. PW Sensor Adjustment (p.133)
2. PF Adjustment (p.133)
3. PF Adjustment (Bottom Margin) (p.133)
Refer to Chapter 5 “Adjustment” for details on the adjustments.
Shaft and
Bushing
Shaft and
Bushing
Tabs
C H E C K
P O I N T
The Stylus Photo 1390 does not have the CD-R Release Lever Sub
Assy. Skip this section for the model.
CD-R Release Lever
Shaft and Bushing
Right CD-R Release Base