Epson 1400 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию, Страница: 76 / 168

EPSON Stylus Photo 1390/1400/1410 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly/Assembly Procedures 76
4.2 Disassembly/Assembly Procedures
The following flowcharts show the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Figure 4-4. Disassembly Flowchart of Stylus Photo 1400/1410
“CSIC Assy”
4.2.6.2 page 94
“CR Motor”
4.2.7.1 page 122
“CR Scale”
4.2.6.1 page 92
“Paper EJ
Frame Assy”
4.2.6.7 page 106
“APG Assy”
4.2.6.4 page 96
Start
“Board Assy”
4.2.5.1 page 90
“Lower Housing and
Printer Mechanism”
4.2.1.5 page 82
“Upper Housing”
4.2.1.4 page 80
“APG Assy”
4.2.6.4 page 96
“Release Holder Assy”
4.2.6.10 page 113
“FLAG Release Assy”
4.2.6.11 page 114
“PE Sensor Holder”
4.2.8.1 page 124
“Upper Paper
Guide Assys”
4.2.6.12 page 115
“PE Sensor Holder”
4.2.8.1 page 124
“APG Assy”
4.2.6.4 page 96
“Printhead”
4.2.6.3 page 95
“Ink System Unit”
4.2.6.13 page 117
“Upper Paper Guide
Assys”
4.2.6.12 page 115
“PF Roller Shaft”
4.2.6.14 page 119
“Waste Ink Pad”
4.2.2 page 84
“Front Paper Guide
Pad”
4.2.3 page 85
“PF Motor”
4.2.7.2 page 123
“Carriage Shaft
and Carriage Unit”
4.2.6.5 page 98
“PictBridge Unit”
4.2.6.6 page 105
4.2.6.9 page 110
“Front Paper Guide and
Paper Eject Roller”
“PF Encoder
Sensor Holder”
4.2.8.3 page 126
“CR Encoder
Sensor Board”
4.2.8.4 page 126
“PW Sensor”
4.2.8.2 page 125
“CD-R Release
Lever Sub Assy”
4.2.6.8 page 107
“Side Housing”
4.2.1.2 page 78
“ASF Assy”
4.2.4 page 86
“Rear Housing”
4.2.1.1 page 78
C H E C K
P O I N T
„ See Figure 4-5 for disassembly flowchart of Stylus Photo 1390. Since Stylus Photo 1390 does
not have the PictBridge Unit and CD-R print-related units, its disassembly/assembly flow is
different from that of Stylus Photo 1400/1410.
„ Stylus Photo 1400 was used to illustrate these disassembly and assembly procedures in this
chapter except for Section 4.3.
4.2.8.4 page 126
“PF Encoder
Sensor Holder”
Stylus Photo 1400/1410
The boxes shown by dashed lines indicate that the part/unit
need to be removed to go to the next step, but does not indicate
the shortest way to remove the part/unit.