Epson 1400 - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию, Страница: 19 / 168

EPSON Stylus Photo 1390/1400/1410 Revision B
PRODUCT DESCRIPTION Printer Function 19
1.4.6 Errors
Note *: Does not apply to Stylus Photo 1390.
Table 1-10. Errors
Error Status Occurrence Condition
Remedy
Stylus Photo 1390 Stylus Photo 1400/1410
Ink end
The cartridge has almost run out of ink. Carry out the ink cartridge replacement operation.
Press the Ink button.
Remove the CD/DVD tray and then press the Ink button.
Paper out
The printer failed to load a sheet of paper. Load a paper in the ASF, and press the Paper button to feed the paper.
---
Set the CD-R guide lever to the ASF position and then
press the Paper button.
Paper jam
1. The printer failed to eject the remaining paper at power-
on.
2. An FF command or a press of the Paper button could not
eject the paper.
3. The printer failed to eject the CD/DVD tray.*
4. The printer prints on a 58 mm (23 in.) or shorter length of
paper.
1. ASF mode
Remove the jammed paper and press the Paper button.
1. ASF mode
Remove the jammed paper and set the CD-R guide
lever to the ASF position. Then press the Paper button.
2. CD-R mode
Remove the jammed CD/DVD tray and press the Paper
button.
Double feed error
The printer has detected that multiple sheets have been fed
simultaneously. Press the Paper button to eject the paper.
---
Set the CD-R guide lever to the ASF position and then
press the Paper button.
No ink cartridge
Ink cartridge error
1. The printer detects at least one ink cartridge is missing.
2. The printer cannot communicate with the CSIC chip on
one of the cartridges.
Make sure genuine EPSON ink cartridges are installed.
---
Remove the CD/DVD tray and then press the Ink button.
Maintenance request
The total amount of waste ink used for cleaning and flushing
has reached the upper limit. Replace the waste ink pad and reset the Waste Ink Counter.
Fatal error
The printer cannot control error. Turn the power off and on again.
CD-R guide error
1. The printer received a print job for cut-sheet when the
CD-R guide lever is set to the CD-R position.
2. The CD-R guide lever is set to the CD-R position during
ASF printing.
N/A
Set the CD-R guide lever to the ASF position.
1. The printer received a print job for CD-R media when the
CD-R guide lever is set to the ASF position.
N/A
Set the CD-R guide lever to the CD-R position.
CD/DVD tray error CD/DVD tray is not inserted. N/A
Insert a CD/DVD tray and press the Paper button.
Unsupported device
connection error
Unsupported device is connected.
N/A
Disconnect the device from the USB connector.