Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 37 / 178

Topclean S 4 Wiring and pneumatic connection of Topclean S
Hauser 37
4.3.5 CPA473 / 474 assemblies
with inductive limit switches
The assembly is delivered completely hosed up. All
you have to do is connect compressed air for
pneumatic operation of the ball valve to the
pneumatic terminal block.
1. Screw the multihose onto the bayonet lock,
ensuring it is strain relieved and free of kinks.
2. Fold hoses no. 5 and 6 back into the multihose.
3. Connect hose no. 2 for position "Measure"
from the multihose to input "2" of the
assembly’s pneumatic connection block.
4. Connect hose no. 3 for position "Service" from
the multihose to input "3" of the assembly’s
pneumatic connection block.
5. Connect the motive water line (D) via a pipe
disconnector (E) to the G3/8 connection of
CYR10.
6. Connect the line for conveyance of cleaning
agent (C) to the G¼ connection of CYR10.
7. Connect the line from CYR10 to the assembly
as follows:
– If you are not using the CPR40 rinse block
(A), connect the line to the rinse water inlet
of the assembly.
– If you are a using the CPR40 rinse block (A),
connect the line to the "T" connection of
CPR40.
8. If you are using an external valve, connect the
line for steam, additional cleaning agents or
sealing water (B) to the other connection of
CPR40.
9. If you are using a pneumatic outlet safety
seal (G):
– Connect the connection 2 (= outlet) of the
limit position switch on the ball valve drive
to input "6" of the assembly’s pneumatic
connection block.
– Connect output "6" of the assembly’s pneu-
matic connection block to the compressed
hose connection of the outlet safety seal.
!
Note!
The maximum hose length is 10 m / 32.81 ft:
• Maximum discharge height: 5 m / 16.41 ft
• Max. horizontal discharge width: 10 m / 32.81 ft
• Pressure resistance of internal components:
up to 7 bar / 101.5 psi
• Maximum suction height of buffer/cleaning
agent: 2 m / 6.56 ft
C07-CPC30xxx-12-04-00-xx-019.eps
ƒig. 33: Connection of CPA473 / 474 assemblies with inductive limit position switches
A CPR40 rinse block, required for Topclean versions with external valve control for con-
veyance of hot, aggressive or pressurised media
B Pressurised steam, water, cleaning agent
C Cleaner
D Motive water 2 ... 7 bar / 29 ... 101.5 psi
E Pipe disconnector (customer supplied)
F CYR10
G Outlet safety seal (optional)