Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 55 / 178

Topclean S 6 Commissioning
Hauser 55
Use the arrow keys to select the programme step that you want to edit,
e.g. water. To edit the programme step, press
F
.
Use the arrow keys to set the required water conveyance interval. Press
F
to return to the list of programme steps.
If necessary, edit other programme steps. The overall programme time is
calculated automatically.
When you are finished with the configuration, press
.
Press
W
and
T
and use the arrow keys to set the start time of Clean,
e.g. 07:00 a.m.. Confirm by pressing
F
. The end time is calculated
automatically.
!
Note!
To test the automatic function, allow the system a lead time of min. 10
minutes when entering the start time.
When the configuration is finished and you want to start Clean via the
automatic function, you must activate this function. To do so, press
until you reach the first Topclean selection.
Select "Activate Topclean" and confirm by pressing
F
.
Select the status of "Automatic". Press
T
and
W
to set Automatic to
"on". Confirm by pressing
F
.
The automatic function is now activated. The selected cleaning
programmes will be started on the selected weekday at the set time
based on the time and date entered in "Setup 1
➠
Display" (see page 57).
Press to return to operation.
Display Action
PARAM
PARAM