Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 104 / 178

6 Commissioning Topclean S
104 Hauser
6.6.18 Diagnosis
To enter the menu, proceed as follows:
⇒
CHOICE
(default = bold) INFO
Error list
Error log
Operating log
Calibration log
Ext. sensor data (digital sensors with Memosens
technology only)
Service
Error list : Displays the currently active errors.
(Complete error list with description see page 125)
Error log : Lists the last 30 signalled errors with date and
time.
Operating log (service code necessary) : Lists the last 30
registered operating steps with date and time.
Calibration log : Lists the last 30 calibrations with date and
time. You can use the right arrow key to obtain further
details on the calibration.
Ext. sensor data : Lists the data stored in the digital sensor,
e.g. sensor identification, calibration data, operating hours,
etc.
!
Note!
• Use the arrow keys to scroll through the lists.
• Leave the lists by pressing
F
.
Calibration log
1 Enter spec. buffer
Zero point
Slpe
El. condit.
<date> <time> Enter spec. buffer : Used calibration method.
Zero point : Zero point calculated during calibration.
Slope : Slope calculated during calibration.
Electrode condition : State of the electrode.
<date> <time> : Calibration date and time
If you are using a digital sensor with Memosens technology, the following data are displayed when you press
T
:
SN
Sensor change date
<date> <time> SN : Serial number of the calibrated sensor.
Sensor change date : Date and time when the sensor was
changed.
Ext. sensor data (digital sensors with Memosens technology only):
When you select "Ext. sensor data", the transmitter indicates that the sensor data are read from the sensor. When reading is finished, the display automatically
switches to the next menu point. If it does not switch automatically, you can display former sensor data by pressing
F
or return to measuring mode by
pressing .
Identification
Calib. data
Comp. temperature
Sensor status
Sensor info
Display of all data stored in the digital sensor
!
Note!
External sensor data can only be displayed for digital
sensors with Memosens technology.
pH
7.00
Diag
Edit Next
Select
E
Hold
Error list
Error log
Operating log
Calibration log
Validation log