Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 105 / 178

Topclean S 6 Commissioning
Hauser 105
Identification
ID
SW ID
HW version
SW version ID : Module ID of the digital sensor.
SW ID : Software ID of the digital sensor.
HW version : Hardware version of the digital sensor.
SW version : Software version of the digital sensor.
Check date
SAP
SN Check date : Date of the sensor’s factory inspection.
SAP : SAP number of the sensor.
SN : Serial number of sensor electronics.
Calibration data
Slpe [mV/pH]
Isoth. point
– pH
– mV
C-ZeroPnt [pH] Slope : Slope of the digital sensor.
Isoth. point : mV and pH components of the isothermic
intersection point.
Chain zero point : Chain zero point of the digital sensor.
Method
No. of cal.
Snlc
Calibration date Method : Calibration method used for the digital sensor.
You can select the calibration method in "Setup 1 >
Calibration".
No. of cal. : Number of calibrations carried out for the
sensor.
Snlc : Serial number of the transmitter used for the last
sensor calibration.
Calibration date : Date of the last sensor calibration.
Buffer 1
Buffer 2
D. slp [mV/pH]
D. zropnt [pH] Buffer 1 : pH value of the first buffer used for the last sensor
calibration.
Buffer 2 : pH value of the second buffer used for the last
sensor calibration.
D. slp : Change in slope compared to the preceding
calibration.
D. zropnt : Change in chain zero point compared to the
preceding calibration.
Temperature compensation
1 pnt delta [°C]
Snlc
Cal. date 1 pnt. delta : Calibrated temperature offset.
Snlc : Serial number of the transmitter used for the last
temperature calibration.
Calibration date : Date of the last temperature calibration.
CHOICE
(default = bold) INFO