Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 85 / 178

Topclean S 6 Commissioning
Hauser 85
!
Note!
To best adapt the controller parameters to the process, we recommend the following:
1. Set the values for the controller parameters (field "Characteristic values for user settings")
2. Deflect process.
Field "Controller simulation": set function to "manual" and enter a set value. Using the actual
value, you can observe how the process is deflected.
3. Switch the function to "auto". Now you can observe how the controller returns the actual value
to the set point.
4. If you want to set other parameters, press the "Enter" key and you will return to field
"Characteristic values for user settings". During this time, the controller continues to run in the
background. If you have made your settings, press the "Enter" key again to return to field
"Selection controller simulation". There, you can continue or exit the simulation.
Only exit the controller simulation in field "Selection controller simulation" with "Simulation off".
Otherwise, the simulation will continue to run in the background.