Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 60 / 178

6 Commissioning Topclean S
60 Hauser
Linear:
0/4 mA: 02.00 pH
/ 000.0 °C / -0500 mV
20 mA: 12.00 pH
/ 100.0 °C / 0500 mV
Entry of the upper and lower measured value limits
The maximum range of the measured value is
–2 ... +16 pH.
The minimum distance from the upper to the lower measured
value limit is 2 pH units.
(Exmp.: 0/4 mA: pH 7 and 20 mA: pH 9)
Linear characteristic active. Note in display:
The linear characteristic is activated after confirmation by pressing
"E". Cancel by pressing "PARAM".
Table:
01
(1 ... 10)
Entry of the number of support points (value pairs)
pH/Redox/°C/: 000.0
mA: 04.00
Value pair entry
pH/Redox/°C - mA (number of required value pairs = number of
support points entered in the previous field).
Example of value pairs with 4 support points:
C07-CPM153xx-05-06-00-xx-002.eps
ƒig. 38: Example of entering a characteristic using a table
OK
Delete pair(s)
Selection:
Are the value pairs OK or do you want to delete pairs?
pH/Redox/°C/: 000.0
mA: 04.00
Delete:
Select the rows to be deleted, delete them with
T
and confirm
this with
F
.
Table valid Note in display (no entry)
Table status. If invalid, then back to previous field.
Table active Note in display:
The table is active after confirmation by pressing
F
. Cancel by
pressing "PARAM".
CHOICE
(default = bold) INFO
Hold pH
7. 00
[E]
Output 1
Next Select[¯®]
Param
0/4mA :
20mA :
02.00 pH
12.00 pH
Hold pH
7. 00
[E]
Table 1
Next Edit[ ¯®]
Param
Total pairs
01
1... 10