Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 106 / 178

6 Commissioning Topclean S
106 Hauser
Sensor status
Period (h)
No. of steril.
T (max) [°C] Period : Total operating hours of the sensor.
No. of steril. : Number of sterilisations applied to the
sensor: T > 135 °C / 275 °F, min. 20 minutes
T (max) : Maximum temperature under which the sensor
was operated.
!
Note!
During sterilisations (T > 135 °C / 275 °F) the transmitter
goes into hold and the display shows "SIP" (Sterilisation in
place).
Operating time (h)
– over 80 °C
– over 100 °C
– <- 300 mV
– > 300 mV Operating hours of the sensor under the following
conditions:
– At temperatures over 80 °C / 176 °F
– At temperatures over 100 °C / 212 °F
– At pH values below -300 mV (= pH 12 @ 25 °C / 77 °F)
– At pH values over +300 mV (= pH 2 @ 25 °C / 77 °F)
1. use
Ri GSCS [Ohm]: 1. use : Date when the sensor was connected to a
transmitter for the first time.
Ri GSCS : Current glass membrane impedance.
Sensor info:
pH (max) [pH]
pH (min) [pH]
Temp (max) [°C]
Temp (min) [°C] pH (max) : Maximum pH value of the specified sensor
application range.
pH (min) : Minimum pH value of the specified sensor
application range.
Temp (max) : Maximum temperature of the specified
sensor applicaiton range.
Temp (min) : Minimum temperature of the specified
sensor application range.
Order code
OVSN
Check date Order code : Order code of the sensor.
OVSN : Overall serial number of the sensor.
Check date : Date of the sensor’s factory inspection.
Service:
Factory reset
Simulation
Instrument check
DAT download
Set up 2
Instrument version
Topclean S
Chemoclean
Reset count
Select service diagnosis
Factory reset : Various data groups can be reset to the
factory settings.
Simulation : The transmitter behaviour can be simulated
after entering various parameters.
Instrument check : The instrument functions (display,
keys, etc.) can be tested individually.
Reset : Device reset ("soft reset").
DAT download : Copy data into/out of the DAT module.
Set up 2 : Instrument reset (="soft reset"), ISFET values and
SCS values
Instrument version : Device internal data e.g. serial
number can be queried.
Topclean S : Inspecting programmes, inputs, mechanics.
Chemoclean (only, if the complete Chemoclean function
is activated): Inspecting programmes, inputs, mechanics.
Reset count : Reset counter, write access.
CHOICE
(default = bold) INFO
Hold
pH 7. 00
Diag
[E] Edit[¯]
Next
Service
Factory reset
Simulation
Instrument check
DAT download
Set up 2 ¯