Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 72 / 178

6 Commissioning Topclean S
72 Hauser
6.6.10 Set up 2 – Data log
The data log records two freely selectable parameters with their date and time. You can start it using
the measuring menus:
Use the arrow keys to scroll through the measuring menus until to you reach the Record mode of
the data log. Pressing the "Enter" key brings you to the Scroll mode of the data log. Here you can
open the saved measured values with their date and time.
To configure the data log, proceed as follows:
⇒ ⇒
CHOICE
(default = bold) INFO
Sample time
Data log 1
Data log 2
DataLog display 1
DataLog display 2
Data log settings
Using the data log you can record
• one parameter with 500 sequential measuring points
• two parameters each with 500 sequential measuring points.
Sample time:
00005s
(2 ... 36000 s)
Enter sample time
Enter the time interval after which the next measured value is
recorded in the data log.
Data log 1 (or 2):
Input:
Function: pH/mV K1
on Selection
Select the measured variable to be recorded (pH/mV , temp.).
Activate recording by setting "Function" to "on".
!
Note!
The data log starts recording the measured value when you
return to operation.
Min:
Max: -02.00
16.00
(-2...16pH/
-1500...1500mV)
Set recording range
Values outside the defined range are not recorded.
DataLog display 1 (or 2)
View of recorded data
PARAM
pH
7.00
Param Settings
Set up 1
Set up 2
Manual operation
First start up
Edit Next E
Hold pH
7.00
Param
Edit Next
Set up 2
E
Hold
Limit switch
Data log
Contr. quick adj.
Controller settings
Check systems
Hold
pH 7. 00
Param
[¯] [E]
Data log
Sample time
Data log 1
DataLog display 2
Data log 2
Next
DataLog display 1
Edit
Hold
pH 7. 00
Param
[ ¯®] [E]
Sample time
Sample time
00005
s
2...36000s
Next Edit
Hold
pH 7. 00
Param
[E]
Data log 1
Next Select
Input : pH/mV input 1
Function : off
[ ¯®]
7.54 pH
12:15:35
pH 7.54
09.04.04
Para DataLog View 1