Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 35 / 178

Topclean S 4 Wiring and pneumatic connection of Topclean S
Hauser 35
4.3.3 CPA471 / 472 / 475 assemblies
with inductive limit position
switches
1. Screw the multihose onto the bayonet lock, ensuring
it is strain relieved and free of kinks.
2. Fold hoses no. 5 and 6 back into the multihose.
3. Connect hose no. 2 for position "Measure" from the
multihose to the upper elbow plug of the assembly.
4. Connect hose no. 3 for the position "Service" from
the multihose to the lower elbow plug of the assem-
bly.
5. Connect the motive water line (D) via a pipe
disconnector (E) to the G3/8 connection of CYR10.
6. Connect the line for conveyance of cleaning agent (C)
to the G¼ connection of CYR10.
7. Connect the line from CYR10 to the assembly as
follows:
– If you are not using the CPR40 rinse block (A),
connect the line to the rinse water inlet of the
assembly.
– If you are a using the CPR40 rinse block (A),
connect the line to the "T" connection of CPR40.
8. If you are using an external valve, connect the line for
steam, additional cleaning agents or sealing water (B)
to the other connection of CPR40.
!
Note!
The maximum hose length is 10 m / 32.81 ft:
• Maximum discharge height: 5 m / 16.41 ft
• Max. horizontal discharge width: 10 m / 32.81 ft
• Pressure resistance of internal components:
up to 7 bar / 101.5 psi
• Maximum suction height of buffer/cleaning agent:
2 m / 6.56 ft
C07-CPC300xx-04-12-00-xx-025.eps
ƒig. 31: Connection of CPA471 / 472 / 475 assemblies with inductive limit position
switches
A CPR40 rinse block, required for Topclean versions with external valve control for
conveyance of hot, aggressive or pressurised media
B Pressurised steam, water, cleaning agent
C Cleaner
D Motive water 2 ... 7 bar / 29 ... 101.5 psi
E Pipe disconnector (customer supplied)
F CYR10