Endress+Hauser Topclean S CPC30, Руководство по эксплуатации

Страница: 87 / 178

Topclean S 6 Commissioning
Hauser 87
To enter the menu, proceed as follows:
6.6.14 Set up 2 - Controller quick adjustment
In this menu, you can adjust the controller setpoint.
To enter the menu, proceed as follows:
⇒ ⇒
CHOICE
(default = bold) INFO
Limit switch 1
Limit switch 2
Limit switch 3
Limit switch 4
Limit switch 5
Selection
of the limit switch which you wish to configure. There are five
limit switches available.
Limit switch 1 / 2 / 3 / 4 / 5:
Function
Assign
On value
Off value
off
pH/Redox
pH 16.00
(1500 mV/
100 %/150°C)
pH 16.00
(1500 mV/
100 %/150°C) Limit switch configuration:
Function : Activation of function as limit switch.
Assignment : Selection of the measured value to which the
limit value (pH/redox, temperature) is assigned.
On point : Entry of the value at which the limit value function
is activated.
Off point : Entry of the value at which the limit value function
is deactivated.
(Settable range: pH –2.00 ... 16.00 /
–1500 mV ... +1500 mV / 0 ... 100% / –50 ... +150°C)
On delay
Off delay
Alarm limit 0000 s
0000 s
pH 16.00
(150°C)
Limit switch configuration:
On delay : Entry of the switch-on delay (range 0 ... 2000 s).
Off delay : Entry of the switch-off delay (range 0 ... 2000 s).
Alarm limit : Entry of the value (alarm threshold) at which the
fault signalling contact switches.
PARAM
pH
7.00
Param Settings
Set up 1
Set up 2
Manual operation
First start up
Edit Next E
Hold pH
7.00
Param
Edit Next
Set up 2
E
Hold
Check systems
Data log
Contr. quick adj.
Limit switch
Controller settings
Hold
pH 7. 00
Param
[E]
Next Edit[¯]
Selection
Limit switch 1
Limit switch 2
Limit switch 3
Limit switch 4
Limit switch 5
Hold
pH 7. 00
Param
[E]
Next Select [ ¯®]
Configuration
Function:
Assign pH/mV Input 1
On value: 16. 00 pH
Off value: 16. 00 pH
off
⇒ ⇒ ⇒
PARAM
pH
7.00
Param Settings
Set up 1
Set up 2
Manual operation
First start up
Edit Next E
Hold
pH
7.00
Param
Edit Next
Set up 2
E
Hold
Check systems
Controller settings
Limit switch
Data log
Contr. quick adj.
pH
7.00
Param
Select Next
Quick adjustm
E
Hold
Function
set
7.00 pH
act. 6.58 pH