Endress+Hauser SpectraSensors SS2000e, Руководство оператора

Страница: 66 / 114

NS 5.14 Firmware
3
–
6 4900002262 rev. B 3-23-21
The Index shown on the LCD display counts by 50’s from 0 to 511.
The analyzer will repetitively output this information until the #
button is pressed or the number of cycles completes. At the end of
the data dump, the screen will display:
4. Press the # key followed by the 1 key to return to Mode 1 .
5. Once normal operation resumes, stop the capture of the serial data.
To stop the capture of the serial data, click on Transfer/Capture
Text/Stop . The resulting data files contain the downloaded data as
shown in Figure 3–5 on page 3–7.
Mode 6 data
The columns of tab delimited data in the file resulting from a Mode 6 data
dump are labeled as follows:
•
Index : Index value of points on spectrum scan curve.
•
DC Dry : Dry DC spectrum of sample gas (0.0 for non-differential
units).
•
DC Dry Ref 1 : Reference 1 dry DC spectrum.
•
DC Wet : Wet DC spectrum of sample gas.
•
DC Wet Ref 1 : Reference 1 wet DC spectrum.
•
2f Dry : Dry AC spectrum of sample gas (0.0 for non-differential
units).
•
2f Dry Ref 1 Pdry/Pwet : Reference 1 dry AC spectrum based on
wet pressure.
•
2f Wet : Wet AC spectrum of sample gas.
•
2f Wet Ref 1 Pwet : Reference 1 wet AC spectrum based on wet
pressure.
•
2f : AC spectrum of sample gas.
•
Ref 1 : Reference 1 AC spectrum.
•
Ref 2 : Reference 2 AC spectrum.
•
Ref 3 : Reference 3 AC spectrum.
•
Ref 4 : Reference 4 AC spectrum.
•
Ref 0 : Reference 0 AC spectrum.
•
Ref 0 RT : Reference 0 real-time AC spectrum.
•
Ref Val : Reference Validation AC spectrum.
MODE