Endress+Hauser Liquiline System CA80NO, Руководство по эксплуатации

Страница: 160 / 172

Technical data Liquiline System CA80NO
160 Hauser
15 Technical data
15.1 Input
Measured variables NO
2
, NO
2
-N [mg/l, µg/l, ppm, ppb]
Measuring range CA80NO-**G2: 10 to 500 µg/l NO
2
-N
CA80NO-**G3: 0.1 to 1.0 mg/l NO
2
-N
CA80NO-**G4: 0.2 to 3.0 mg/l NO
2
-N
Types of input • 1 or 2 measuring channels (analyzer main parameter)
• 1 to 4 digital sensor inputs for sensors with Memosens protocol (optional)
• Analog current inputs (optional)
• Binary inputs (optional)
Input signal Depending on version
2 x 0/4 to 20 mA (optional), passive, potentially isolated
Current input, passive Span
> 0 to 20 mA
Signal characteristic
Linear
Internal resistance
Non-linear
Test voltage
500 V
Hose specification (self-
priming analyzer)
• Clearance: max. 1.0 m (3.3 ft)
• Height: max. 0.5 m (1.6 ft)
• Hose ID: 1.6 mm (¹/
16
in)
Cable specification
(for optional sensors with
Memosens technology)
Cable type
Memosens data cable CYK10 or sensor fixed cable, each with cable end sleeves or M12
round-pin connector (optional)
Cable length
Max. 100 m (330 ft)
15.2 Output
Output signal Depending on version:
• 2 x 0/4 to 20 mA, active, potentially isolated (standard version)
• 4 x 0/4 to 20 mA, active, potentially isolated (version with 2 additional analog outputs)
• 6 x 0/4 to 20 mA, active, potentially isolated (version with 4 additional analog outputs)
• Binary outputs